| [1]Sevalia J K,Siddhpura N B,Agrawal C S,et al.Study on Bam-
boo as Reinforcement in Cement Concrete [J].International Joumal
of Engineering Research and Applications,2013,3 (2):1181-
1190.
[2]Hu X,Liu J,Wang Y,et al.Composite Nanoplatforms Based on
Nanocalcium Peroxide for Cancer Treatment:From Monotherapy to
Combination Therapy [J].Advanced therapeutics,2023 (8):6.
[3]WarguLA E,Wojtkowiak D,Kukla M,et al.Modelling the
process of splitting wood and chipless cutting Pinus sylvestris L.
wood in terms of designing the geometry of the tools and the driving
force of the machine J].European Journal of Wood and Wood
Products,2022,81（1):223-237.
[4]刘九庆，张骏杰，朱斌海。电链锯锯齿温度场的仿真分析与实
验探究[J].林产工业，2022,59(02)：33-38.
[5]陈杰，卢玉斌，侯玉波.基于ABAQUS的圆锯片切削竹简仿真
试验研究[J].林产工业，2023,60(03)：38-43.
[6 Hashin Z.Fatigue Failure Criteria for Unidirectional Fiber Compos-
ites [J].Journal of Applied Mechanics,1981.
[7]李响，贾欲明，洪润民.Hashin准则的应力应变形式在复合材
料渐进损伤计算中的对比[J].机械工程学报，2022,58
(22):284-293.
[8]Donadon M V,lannucci L,Falzon B G,et al.A progressive fail-
ure model for composite laminates subjected to low velocity impact
damage-ScienceDirect [J].Computers Structures,2008,86
(11-12):1232-1252.[9]Yang L,Yan Y,Kuang N.Experimental and numerical investiga-
tion of aramid fibre reinforced laminates subjected to low velocity im-
paet [J].Polymer Testing,2013,32 (7)1163-1173.
10]Zenia S,Ayed L B,Nouari M,et al.Numerical prediction of the
chip formation process and induced damage during the machining of
carbon/epoxy composites [J.Intemational Journal of Mechanical
Sciences,2015,90:89-101.
[11]张荣兴，张德晖，黄文城，等。毛竹竹篼顺横纹抗剪性能的
试验[J].东北林业大学学报，2021,49(04)：66-70.
[12]Heravi AA,Smimova O,Mechtcherine V.Effect of Strain Rate
and Fiber Type on Tensile Behavior of High-Strength Strain-Hard-
ening Cement-Based Composites HS-SHCC)[C].Strain-
hardening cement-based composites.2018.
[13]包永洁.高温热处理前后竹材主要化学成分及物理力学性能
研究[D].南京：南京林业大学，2010[14]张占宽，彭晓瑞，李伟光，等。切削参数对木材切削力的影
响[J].木材工业，2011,25(03)：7-10.
[15]杨永福。竹材切削加工性能研究[D].北京：北京林业大学，
2005.
[16]
李黎.木材切削原理与刀具[M].北京：中国林业出版社，
2005.
[17]任旺.数控竹方纵向创切机的设计与研究[D].镇江：江苏
科技大学，2022.
[18]张硕.金刚石刀具对KDP晶体切削加工表面微缺陷影响研究
[D].哈尔滨：哈尔滨工业大学，2022.
[19]Zhang X,Wu H.Effect of tool angle on cutting force and residual
stress in the oblique cutting of TC21 alloy [J.The Interational
Joumal of Advanced Manufacturing Technology,2018. |
